Which date on the carton counts?
Photograph the lot code and every date on the outer carton before splitting it between locations. Match the product code to the liner size and roll count on the order. If a date could mean packing, manufacture or recommended last use, ask the supplier to decode the label in writing. Where the only date is on the invoice, leave the end date open until you receive the lot details.
For example, BioBag's international guidance measures its stated range from production and ties it to product and storage conditions. EcoSafe's FAQ discusses weakening at the seams of its own bags over time. For a ReRoot enquiry, request the written conditions and date basis for the proposed finished liner. A compostability certificate answers a different question from how long a roll can stay in stock.
Can you finish the stock before the confirmed date?
Divide the number of bags on hand by the number actually used in a typical week. Use the quiet site's own issue records if you supply several outlets. A central warehouse can move a carton quickly while the last roll sits in a small kitchen for months.
Worked example for a purchasing decision. Catalogue reference 01-02 lists 12 bags per roll and 20 rolls per carton, or 240 bags. Suppose a kitchen uses 24 liners per week. One carton covers 10 weeks. If this particular lot has only six confirmed weeks left on delivery, that kitchen can use 144 bags within the window, leaving 96 bags, or eight rolls. Ask for a later-dated lot, split the order, or allocate those eight rolls to a site that can use them in time. Six weeks here is an example input. The catalogue gives no shelf life for 01-02.
Will you use this lot in time?
- Weeks to use all stock
- —
- Bags left at the confirmed date
- —
What changes when a carton is opened?
Keep the label with the remaining rolls. Mark when the carton and the inner wrapping were first opened, especially if these happened on different days. Ask which wrapping must stay intact and whether a shorter use period applies after opening. If so, use the earlier applicable end date. Keep spare rolls in the supplier-specified packaging and location, and record any heat, damp or direct sun exposure before returning them to stock.
When two lots have confirmed dates, issue the lot with the earliest applicable end date first, even if it arrived second. Keep a separate queue for untraceable rolls. Moving a roll to a new carton or opening it cannot establish a new shelf life.
An older roll splits at the seam. What do you do next?
Pause issue of the affected stock. Keep the carton label, a failed bag and a sample from an unopened roll of the same lot if available. Using the same caddy and a safe representative load, observe where the bag first fails. A tear at the perforation while dispensing and a bottom seam opening on lifting are different observations. Record the load, storage history and location of the tear. If the same snag appears at the rim with both a recent reference roll and the suspect roll, inspect the bin edge as well.
Send the observations to the supplier for a decision on that lot. A successful trial helps isolate a handling problem. Extending a confirmed end date or releasing a failed lot needs a separate decision supported by the supplier's written guidance. Use the sample review checklist for repeat observations or check the bin liner carton counts for a proposed order.